DMC Compound Cone Crusher

Name: DMC Compound Cone Crusher
Brand: DynaMix Power
Availability: InStock

DMC Compound Cone Crusher — Stationary Crusher. Max. feed size 160-350mm, Motor power 110-315kW, Capacity 80-725t/h.

Capacity: 80-725t/h

Capacity (t/h) is quoted per closed side setting (mm); a blank cell is a combination the factory does not list. Chamber letters follow the conventional cone crusher series: C = coarse, M = medium, F = fine, EF = extra fine.

The DMC compound cone crusher has a simple structure that makes it easy to operate and maintain. The discharge opening adjusts quickly, and servicing is faster and less labour-intensive than on a comparable machine - the liners in particular can be changed quickly, which shortens downtime.

The machine is driven by an electric motor through V-belts and a large pulley. The drive shaft turns a small bevel gear, which drives the large bevel gear and the eccentric sleeve. The crushing cone is forced into a gyrating motion by that eccentric sleeve, so the mantle moves towards and away from the fixed cone surface in turn. Material inside the crushing chamber is repeatedly squeezed, impacted and bent until it breaks.

Advantages

High reliability and stable running

A large-diameter main shaft, a heavy-duty main frame and an independently lubricated oil system with automatic control keep the machine robust and reliable. An iron-release protection device lets tramp metal pass through the crushing chamber and then restores the original discharge opening quickly, so the product size stays consistent.

Convenient maintenance and operation

Wear parts are locked mechanically without filler, which makes them easier and quicker to replace and saves the customer both time and investment.

Low operating cost, wide application range

High capacity, high reliability and straightforward maintenance together keep production costs down. Laminated crushing forms a protective material layer that reduces wear and extends the life of the wear parts, while also raising the proportion of cubic product and making the grading more even.

Simple structure

A simple structure makes the crusher easy to operate and maintain, and the discharge opening can be adjusted quickly and conveniently.

Applications

Mining and rock crushing
Finished aggregates
Manufactured sand
Solid waste recycling
Refractory materials and cement
Roads, bridges and expressways

Indicative price: USD 55,100 – 204,300 — across the models in this series; the final price depends on configuration, options and delivery term.

Spare parts for this machine

Choosing a DMC compound cone crusher and chamber

The DMC compound cone crusher is a secondary and tertiary machine with a simple structure that keeps operation and maintenance straightforward. An electric motor drives the drive shaft through V-belts and a large pulley; a small bevel gear turns the large bevel gear and the eccentric sleeve, and the eccentric sleeve forces the crushing cone into a gyrating motion. The mantle therefore approaches and leaves the fixed cone surface in turn, and the material in the chamber is repeatedly squeezed, impacted and bent until it breaks.

The applications are mining and rock crushing, finished aggregates, manufactured sand, solid waste recycling, refractory materials and cement, and roads, bridges and expressways.

The table is the most detailed one in the range and it is best read in two steps. There are six models, DMC1000 through DMC1950, and each is published in four chambers - C, M, F and EF - where the chamber letter decides the feed the machine will take: the maximum feed size column runs from 50 mm on the DMC1000 EF chamber up to 350 mm on the DMC1950 C chamber. The min discharge opening column then tells you how fine the machine can be set, from 6 to 22 mm. Only after those two steps should you compare capacity: the numbered column headings are closed side settings in millimetres from 6 to 64, the capacity in t/h sits under each, and a blank cell is a combination the manufacturer does not list. Motor power runs from 110 to 280-315 kW and weight from 10.51 to 44.3 t.

Before ordering, settle the feed material and its largest lump, how fine the finished product must be, the tonnage required, the power supply, and whether the chamber may need to change as the product mix changes.

Export Since 2013

13 years of crusher expertise: plant layout design, machine troubleshooting and after-sales support. We can recommend alternative equipment if your current model fails to meet demands.

One-point Service

Strict pre-shipment QC, one single contact for your whole project.

Compatible Parts

Direct supply of aftermarket replacement parts compatible with Metso, Sandvik and other mainstream brands.

Faster Delivery

Part quality comparable to OEM, with better price and shorter delivery time than original factories.

Other products in this category

Other languages

Tel / WhatsApp: +86 18616330128 | E-mail: ensaichen@dynamixpower.com